ATS Air Refrigerated Air Dryer
ATS Air Solutions (M) Sdn BhdType: Sale
ATS has designed and manufactured a new range of refrigerated compressed air dryers that provide a combination of technology and performance
Description
ATS has designed and manufactured a new range of refrigerated compressed air dryers that provide a combination of technology and performance
Functionality principle
The warm compressed air enters the air/air heat exchanger and becomes pre-cooled by the outgoing cold air. Secondly, the pre-cooled air passes through the evaporator where it is cooled to the required temperature. Thirdly, the condensate, separated from the compressed air in the demister, is discharged automatically by the condensate drain. Finally the refrigerant and the temperature are regulated by a by-pass pressure valve.
Main features
• Low pressure drop
• High technology ultra-compact aluminum heat exchanger
• Easy maintenance
• Oversize components
Technical details of control panels
The control panels are user friendly, allowing the monitor of:
• Dew point
• Operating modes
• Drain management
• Alarm management
Ultra compact heat exchanger
The main component of the refrigeration air dryers is the heat exchanger. This compact aluminium unit contains various stages of the treatment of compressed air.
Air/air exchanger. Where the first phase is carried out.
In this section the inlet air is pre-cooled and the outlet air is post- heated. This allows the reduction of energy consumption of the chiller circuit and reduces the possibility of condensate forming on the outer surface of the outlet pipe.
Flow mixing chamber. Unlike other exchangers on the market, the unit designed has a flow mixing chamber at the air/air exchanger outlet. This passage is very important because the air temperatures at the exit of the air/air exchanger channels are not uniform. The mixing chamber enables the air flow to enter the evaporator channels at a uniform temperature, allowing an optimum exchange.
Evaporator. The air cooled in the evaporator passes through a demister separator which allows the condensate to drain into a large collecting chamber. The design of both module and demister allows pressure drop values to be kept low.
Functionality principle
The warm compressed air enters the air/air heat exchanger and becomes pre-cooled by the outgoing cold air. Secondly, the pre-cooled air passes through the evaporator where it is cooled to the required temperature. Thirdly, the condensate, separated from the compressed air in the demister, is discharged automatically by the condensate drain. Finally the refrigerant and the temperature are regulated by a by-pass pressure valve.
Main features
• Low pressure drop
• High technology ultra-compact aluminum heat exchanger
• Easy maintenance
• Oversize components
Technical details of control panels
The control panels are user friendly, allowing the monitor of:
• Dew point
• Operating modes
• Drain management
• Alarm management
Ultra compact heat exchanger
The main component of the refrigeration air dryers is the heat exchanger. This compact aluminium unit contains various stages of the treatment of compressed air.
Air/air exchanger. Where the first phase is carried out.
In this section the inlet air is pre-cooled and the outlet air is post- heated. This allows the reduction of energy consumption of the chiller circuit and reduces the possibility of condensate forming on the outer surface of the outlet pipe.
Flow mixing chamber. Unlike other exchangers on the market, the unit designed has a flow mixing chamber at the air/air exchanger outlet. This passage is very important because the air temperatures at the exit of the air/air exchanger channels are not uniform. The mixing chamber enables the air flow to enter the evaporator channels at a uniform temperature, allowing an optimum exchange.
Evaporator. The air cooled in the evaporator passes through a demister separator which allows the condensate to drain into a large collecting chamber. The design of both module and demister allows pressure drop values to be kept low.
Company Information
Name | : | ATS Air Solutions (M) Sdn Bhd |
---|---|---|
Business Type | : | Compressors - Air & Gas , Filters - Air & Gas - Commercial & Industrial |
Main Product | : | ATS Zero Purge / Lost Heat Regenerated Air Dryer (DMA Series), ATS N2/O2 Generator, La-Man Extractor / Dryer, Internal & External Automation Drain Mechanical Auto Drain Trap, ATS Compressed Air Filter / Water Separator |
Year Established | : | |
Location | : | Subang Jaya |
Website | : | http://www.ats-malaysia.com |